ENCAD T-200 Guide de dépannage télécharger pdf (Page 64)

Installing additional memory A-2

ENCAD

T-200

Reference Guide

➪➪

➪

To remove the right cover

1 Disconnect the power and the interface cables.

2 Remove the printer's top cover.

3 Remove the three screws which attach the cover to the right plate.

4 Move the right cover, being careful to clear the parallel port on the

back of the unit.

DIMM Slots

➪➪

➪ To remove the DIMMs

1 Facing the top of the DIMMs, push the side clips gently to the outside

(away from the DIMM) until the DIMM is released from the socket.

2 The DIMM should pop up. Lift the DIMM straight up out of the socket.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 90 91

Printer Reference Guide 1
WARRANTY CLAIMS 2
FCC Statement (U.S.A.) 3
VDE statement 4
Industry Canada 4
Material safety data sheet 4
General operating safety 5
Manual conventions 5
Other reference materials 6
Contents 7
EFERENCE GUIDE 8
Printer setup 1 10
Printing 11
Obtaining quality results 11
Use the right inks and media 11
Choose the right media 12
Caring for your media 13
Use the right software 13
Status LEDS 14
Selection 14
Choosing menu functions 15
Setting the language 15
To choose a language 15
To choose supply type 15
Loading media 16
To load media 16
Feed media 16
To feed media 16
Moving the carriage 17
To move the carriage 17
Installing the cutter 17
To install the cutter 17
➪ To print the color test 18
Printing the prime pattern 19
To print the prime pattern 19
Clogged jets 20
Cleaning jets 21
To use the clean function 21
Manual jet compensation 21
Aligning the ink cartridges 22
Performing color calibration 24
To perform color calibration 24
Paper axis calibration 25
Cartridge recognition 26
Installing software 27
Windows driver 27
To install the Windows driver 27
HDI version 6 and 7 drivers 28
ADI driver 29
To install the ADI driver: 30
Network considerations 31
Making a test print 31
Canceling a print 31
Printer options 2 32
LED display 33
Printing the settings 34
Choosing print mode options 34
Color mode 35
To choose the color mode 35
Quality modes 35
To choose print quality 36
Resolution 36
To choose resolution 36
Choosing paper options 37
Media supply 37
Media standard 37
To choose the media standard 37
Printer Options 2-7 38
Reference Guide 38
Printer Options 2-8 39
Printer Options 2-9 40
Printer Options 2-10 41
Printer Options 2-11 42
To set margins 43
Auto-Cut 43
To set Auto-Cut 43
Save Media 43
To turn off Save Media 43
Auto-Wipe 44
To turn off the wiper 44
Defining user setup 44
To save user setup 44
Defining units of measure 45
To choose measurement units 45
Choosing a language 45
➪ To set the ink preheat time 46
➪ To set the dry time 47
Printer Default Settings 48
Printing a file 49
Heidi driver 49
Device and document settings 50
Custom properties 51
Printing 3-4 52
Stopping printing 54
Spooling 54
HP-GL/2 options 4 55
Accessing HP-GL/2 features 56
To access HP-GL/2 features 56
Palette select 56
To choose a palette type 56
➪ To set control 57
To rotate the image 58
Ink reduction 58
To set ink reduction 58
Rotation 58
Reprints 59
To make multiple prints 59
➪ To enable nesting 60
Nest time 61
To define nesting time 61
Ink limit 61
To enable the ink limit 61
HP-GL/2 Test File 62
To print the test file 62
Acceptable DIMM sizes 63
DIMM installation 63
To remove the right cover 64
To remove the DIMMs 64
➪ To install the new DIMM 65
Menu tree B 66
Setup menu at a glance 67
Setup menu 68
User Setup 69
Ink Options 69
Utility menu at a glance 70
Utility menu 70
Color Calib 71
Db Calib 71
Paper Calib 71
Display Settings 71
Print Settings 72
Service Menu 72
Open Jets 72
Technical information C 73
Technical information C-2 74
REFERENCE GUIDE 74
Cartridge errors 75
Memory Errors 76
Troubleshooting E 77
Printer Health 78
Encoder Strip 80
Trailing Cable Shelf 80
Data Transfer 86
Application Software 88
Calling for Help 90
Customer Technical Support 91

Commentaires sur ces manuels

Pas de commentaire

ENCAD T-200 Guide de dépannage Page 64

Commentaires sur ces manuels